Publicité
Les langues disponibles
Les langues disponibles
3.2.- Fast printing
3.2.- Fast printing
When the D key is pressed the fast printing function is executed. This function prints the graphs of all the active
When the D key is pressed the fast printing function is executed. This function prints the graphs of all the active
inputs, with the data logged during the last period.
inputs, with the data logged during the last period.
This period cannot contain gaps in continuity and its length is defined by the recording interval, as set out in the
This period cannot contain gaps in continuity and its length is defined by the recording interval, as set out in the
following table:
following table:
A gap in continuity is caused every time recording is stopped, or every time we make any change in the unit's configuration
A gap in continuity is caused every time recording is stopped, or every time we make any change in the unit's configuration
that affects the date/time parameters, description of inputs, measuring units, input type or recording interval.
that affects the date/time parameters, description of inputs, measuring units, input type or recording interval.
If it does not have sufficient data saved, the unit will display the message "Insufficient data to print graphic"
If it does not have sufficient data saved, the unit will display the message "Insufficient data to print graphic"
and will print the most recent data logged since the last change in configuration.
and will print the most recent data logged since the last change in configuration.
NOTE: If the logging interval is 15', it prints the data from the previous calendar week (from Monday to
NOTE: If the logging interval is 15', it prints the data from the previous calendar week (from Monday to
Sunday). This function is available from the last log, that will occur on Monday at the time when the last
Sunday). This function is available from the last log, that will occur on Monday at the time when the last
change in the configuration was made.
change in the configuration was made.
3.3.- User menu
3.3.- User menu
The user menu allows you to access the unit's most frequently used functions. Press the SET key for 5 seconds in
The user menu allows you to access the unit's most frequently used functions. Press the SET key for 5 seconds in
order to access.
order to access.
Use the N or Q keys to scroll through the various options and press SET to access them.
Use the N or Q keys to scroll through the various options and press SET to access them.
3.3.1.- Logger
3.3.1.- Logger
Obtaining logged data.
Allows you to display or print the data logged during the time period selected.
Allows you to display or print the data logged during the time period selected.
Use the N or Q keys to scroll through complete weeks.
Use the N or Q keys to scroll through complete weeks.
Use the P or O keys to scroll through single days.
Use the P or O keys to scroll through single days.
To select several consecutive days, press ? to fix the start and extend the selection with the O key (maximum 7 days).
To select several consecutive days, press ? to fix the start and extend the selection with the O key (maximum 7 days).
Once the selection is defined, press SET. Three options appear:
Once the selection is defined, press SET. Three options appear:
7
7
-Displaying data
-Displaying data
Displays on the screen the data recorded during the selected period of the first active input.
Displays on the screen the data recorded during the selected period of the first active input.
Input
displayed
Date of the
recording
Time of the
recording
(only AKO-15742,15752 and 15782)
(only AKO-15742,15752 and 15782)
Recording interval
1 min.
5 min.
15 min.
30 min.
Period to be printed
672 min. (11 hours)
3.360 min. (56 hours)
Last complete calendar week
(From Monday to Sunday)
14 days
Recording
value
To scroll through logs: N o Q
Recording
To scroll through inputs: P o O
number
25
Publicité
Chapitres
