Operation; Selecting The Input Source - Sony XVM-F65WL Mode D'emploi

Operation

Selecting the input source

You can select the input source.
INPUT
1
Press (POWER).
On the card remote commander, press
The power is turned on.
2
Press (INPUT) to select the desired input source.
Each time you press (INPUT), the indication changes in the following sequence:
VIDEO 1
To select the connected navigation system
Press (INPUT) repeatedly to select "NAVI".
Note
If you use the monitor with the rechargeable battery (MV-100BAT), the monitor
automatically enters into the receiver mode when turned on. The (INPUT) button is
deactivated and the input source is fixed to the receiver mode. See "Using the
rechargeable battery" (page 12).
* Note on wireless transmission (Receiver mode)
Simultaneous use with other 2.4 GHz equipment may cause image interference or audio
noise. This is not a malfunction, but a result of equipment sharing the same operating
frequency.
8
POWER
VOLUME
＋/−
.
{/1
VIDEO 2 NAVI
ATT
INPUT MENU MODE
INPUT
VOL
RECEIVER *
`/1
`/1
V/v