switel HSIP 5700 Manuel De L'utilisateur page 20

Main Screen
Network Setup
Firmware Upgrade
ADDING NEW CAMERAS
Your monitor supports a total of four active cameras at a time. When you add a camera, you have to pair it
to the monitor (that is, you have to "introduce" the camera and monitor to each other so they can
communicate).
• If a camera is already assigned to the channel you want to assign the new camera to, the monitor
overwrites the existing camera link with the new one.
• Only pair one camera at a time! The monitor links to the first camera it detects. If two or more camera
are in pairing mode, you can't control which camera the monitor will detect first.
PAIR CAMERAS
1 From the Pairing Camera screen, tap the camera image you want to pair. A processing icon displays
for a 30 second countdown.
2 During the 30 second countdown, quickly press and release the Pairing button on the camera.
3 The system automatically adjusts the Live View screen accordingly.
TROUBLESHOOTING CAMERA PAIRING
If...
the camera's signal status
icon shows no bars
the camera won't pair with
the monitor
18
Sub-Screen
Advanced
Setup
Reset
Password
Information
Lets you select how you want to upgrade your firmware (from SD card
or from server).
Try...
• making sure the camera is plugged in.
• making sure that the camera's antenna is attahced and the monitor's
antenna is extended.
• making sure the camera is paired to the correct channel.
• re-pairing the camera and monitor.
• making sure the camera is plugged in.
• pressing and releasing the pairing button quickly. Do not press and hold
the pairing button.
What it Does
Set up Dynamic or Static IP address.
Reset app password to the default (000000).
Displays and allows you to change information
about your network and the monitor's unique UID
number.