switel HSIP 5700 Manuel De L'utilisateur page 19

GENERAL SETTINGS
The General Settings screen contains 6 subsections, each of which may contain sub-screens. These sub-
screens let you set features about your system. You can turn cameras on and off, establish a specific
schedule for specific cameras to record, set the date and time, and motion detection sensitivity, among
other features.
1 Tap .
Main Screen
Camera Setup
Recording Setup
System Settings
Motion Detection
Settings
Sub-Screen
Pairing
ON/OFF
Resolution
Duration
Schedule Recording
File Overwrite
Date & Time
Time Zone
Language
Default Settings
Format SD Card
Information
A single screen lets you set motion detection sensitivity for each camera.
It also lets you determine which viewing areas for each camera should be
masked from motion detection.
What it Does
This system comes with cameras already paired. Use
Pairing to assign these cameras to different channels
or to pair additional new cameras to the monitor.
Makes the cameras visible to the monitor.
Adjusts the video quality of each camera.
Set the length of time the camera records once
motion sensitivity triggers the camera to record.
Choices are 15 seconds, 30 seconds, or 1 minute
(Default - 15 seconds)
Set up a schedule for pre-determined recording times
and lengths.
Overwrites the oldest recorded data on the SD card
once the card is full.
Set the current time.
• Set the time zone for your system.
• Enable/Disable Daylight Savings Time.
Changes languages setting for the monitor.
Restores the system to default settings.
Reformats the SD card and deletes all existing data.
Displays firmware information for the monitor and
each camera.
17