Fermax Veo Duox Plus Manuel D'installation page 44

4.1 USER MENU: MONITOR VOLUME SETTINGS
It is possible to adjust the volume of the ringtone within a range of ten possible values.
F2
4.2 USER MENU: DO NOT DISTURB MODE
This icon allows you to enable/disable the Dial Tone (Do Not Disturb).
F2
Press the icon
call is heard).
The red LED on the monitor blinks slowly when the Do Not Disturb mode is active.
4.3 USER MENU: DISPLAY IMAGES
This icon allows you to view images that have been automatically captured and delete
them. For more information
F2
16
DUOX PLUS VEO MONITOR
to change the selection. By default normal operation is selected (The
see Chapter on Operation: Image Display.
Firstly, the current volume is displayed
and can be increased (+) or decreased
(-) with the corresponding buttons. These
will allow you to achieve your desired
settings.
F2
10/04/2019 09:28 130 / 149