Led; Induction Loop; Programming; Access Administrator And User Menu - Fermax Veo Duox Plus Manuel D'installation

Menu Button.
· To access:
- Programming Menu, it is accessed when the monitor is not programmed.
From this menu, you can program the monitor according to your installation
needs.
- User Menu, (once the monitor is programmed). From this menu, you can
access the user settings and customise them as you wish.

LED

Red LED:
Intermittent fast blinking. Monitor not programmed.
Intermittent slow blinking. Indicates that the Do Not Disturb feature is enabled.
Switched on. Monitor is idle.

Induction Loop

INDUCTION LOOP Identifi ed with this label (depending on model). A version
of the VEO monitor with an inductive loop on the monitor receiver is avail-
able.

PROGRAMMING:

1. PROGRAMMING: ACCESS ADMINISTRATOR AND USER MENU
Screen: ADMINISTRATOR menu
Do Not Disturb icons (Screen: User Menu) and Image Capture (User Menu Screen. User
Settings option) will change depending on whether they are enabled/disabled. If they
are enabled, a green tick will be displayed
whereas if it is disabled you will see a red cross
10
DUOX PLUS VEO MONITOR
See 97507 Telephone Receiver Inductive Loop on www.fermax.com.
· Includes an induction loop that works with devices worn by people with
hearing disabilities.
Note: In hearing aids with manual mode selection, the Digital Mode
must be set.
F2
Screen: USER Menu
in the top right-hand corner of the icon,
.