Sony PS2 Mode D'emploi page 8

Notes on safety when using the analog controller
(DUALSHOCK 2)*
®
• Stop using the console immediately if you begin to feel tired or if you experience
discomfort or pain in your hands or arms while operating the analog controller
(DUALSHOCK 2). If the condition persists, consult a doctor.
®
• The analog controller (DUALSHOCK
Do not bring it into contact with your head, face or the bones of any other part of
the body.
• The vibration function of the analog controller (DUALSHOCK
injuries. Do not use the vibration function if you have any ailment or injury to the
bones, joints or muscles of your hands or arms. Note that some PlayStation
PlayStation format software titles set the vibration function to "On" by default. In
®
most cases, the vibration function can be set to "Off" in the options menu of the
software. If you have an ailment or an injury, do not play such titles using the
analog controller (DUALSHOCK
"Off".
• Avoid prolonged use of the analog controller (DUALSHOCK
about 30-minute intervals.
* These notes also apply to the analog controller (DUALSHOCK
Network (except Local Area Networks)
• A dial-up or broadband Internet connection is required to connect to a network.
• When you connect to a network, the Internet service provider may charge a usage
fee. In some cases, usage charges may be more than anticipated. For details, refer
to the instructions provided with the software or contact your Internet service
provider.
Connecting to a telephone line
Do not connect a cord of any type other than a home-use phone cord to the line
connector. Cords for the following types of phones should NOT be used:
• ISDN (digital) compatible public phone
• PBX phone
• Cellular phone or car phone
• Home or business telephone network phone
8
Precautions
2) is intended for use with the hands only.
®
2) can aggravate
®
2) unless you have set the vibration function to
®
2). Take a break at
®
).
®
Connecting with a network cable
Do not connect network cables or telephone cords of the following types to the
network connector:
• Network cables not appropriate for use with a 10Base-T/100Base-TX network
• Standard residential telephone lines
• Any ISDN (digital) compatible phone or data line
• PBX phone lines
• Other "unknown" types of telephone lines
Disc handling
• Do not touch the disc surface when handling a disc; hold it by the edges.
2 and
®
• Do not stick paper or tape onto discs and do not write on discs.
• Fingerprints, dust, dirt or scratches on the disc can distort the picture or reduce
sound quality. Always handle carefully and make sure discs are clean before use.
• Do not leave discs near a heat source, in direct sunlight or in high humidity.
• Store discs in their cases when not in use.
• Clean discs using a soft cloth, lightly wiping from the center outwards.
Do not use solvents such as benzine, commercially available cleaners not intended
for CDs or anti-static spray intended for vinyl LPs.
• Do not use irregularly shaped discs (for example, heart- or star-shaped discs) or
damaged, re-shaped or repaired discs.
Do not move the console with a disc inserted
Do not move or change the position of the console with a disc inserted. The vibration
may result in scratching of the disc or the console.
Never disassemble the console or supplied accessories
Use the PlayStation 2 console and accessories according to the instructions in this
®
manual. No authorization for the analysis or modification of the console, or the
analysis and use of its circuit configurations, is provided. There are no user-
serviceable components inside the PlayStation
console will void the warranty. Additionally, there is a risk of exposure to laser
radiation as well as to electrical shock hazards.
When connecting the console to a plasma or projection* TV
Do not leave a still image on the TV screen for an extended period of time, as this
may leave a faint image permanently on the screen.
* Except LCD screen types.
2 console. Disassembling the
®