Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Initial Settings
Switching the Ever Scroll
When Ever Scroll is set to ON, recorded text in-
formation scrolls continuously in the display.
Set to OFF if you prefer the information to
scroll just once.
1
Use MULTI-CONTROL to select
EVER SCROLL.
2
Press MULTI-CONTROL to turn the Ever
Scroll on.
# To turn the Ever Scroll off, press
MULTI-CONTROL again.
Activating the BT AUDIO source
You need to activate the BT AUDIO source in
order to use a Bluetooth audio player.
! You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
1
Use MULTI-CONTROL to select
BT AUDIO.
2
Press MULTI-CONTROL to turn the
BT AUDIO source on.
# To turn the BT AUDIO source off, press
MULTI-CONTROL again.
Entering PIN code for
Bluetooth wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is 0000, but you
can change this in this function.
! With some Bluetooth audio players, you
may be required to enter the Bluetooth
audio player PIN code in advance to set
this unit for a connection.
! You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
1
Use MULTI-CONTROL to select
PIN CODE INPUT.
2
Press MULTI-CONTROL to display the
setting mode.
# Press BACK to return to the previous display.
3
Turn MULTI-CONTROL to select a num-
ber.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.
4
Press MULTI-CONTROL to move the cur-
sor to the next position.
# You can also perform the same operations by
pushing MULTI-CONTROL right.
5
After inputting PIN code (up to 4 di-
gits), press and hold MULTI-CONTROL.
PIN code can be stored in memory.
Displaying system version of
Bluetooth adapter for repair
Should this unit connecting Bluetooth adapter
fails to operate properly and you consult your
dealer for repair, you may be asked to indicate
the system version and Bluetooth module ver-
sion of the adapter. You can display the ver-
sions and confirm them.
! You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
1
Use MULTI-CONTROL to select
BT VER INFO.
2
Press MULTI-CONTROL to display the
setting mode.
# Press BACK to return to the previous display.
3
Use MULTI-CONTROL to select the de-
sired setting.
Turn to change the setting.
System version—Bluetooth module ver-
sion
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.
Section
04
29
En
Publicité
Chapitres
Table des Matières
