Technical Data - IB RUBINETTI 312 Notice De Montage

Masquer les pouces Voir aussi pour 312:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN

TECHNICAL DATA

Minimum dynamic pressure: 0.5 bar
Maximum operational pressure: 5 bar
Recommended operational pressure: 1-5 bar
It's recommended to use a pressure reducer in case of
static pressure superior than 5 bar inside the waterpipe.
Maximum hot water temperature: 80°C
INSTALLATION, MAINTENANCE AND PRELIMINARY CHECKING PROCEDURE
In order to get your device work correctly and fi ne in time, must ensure compliance with the
mode of installation and maintenance described in this booklet. Relying on a qualifi ed plumber.
Make sure that the system is free from all debris and impurities existing.
INSTALLATION
ATTENTION: The instructions are valid for the different models of spout and handle; the assem-
bly is always the same.
Fig. 1: Unscrew the screws from the carter and remove it. Unscrew the cover. Unscrew the
screws and remove the fl at cover. ATTENTION: do not throw the 4 screws, you will need them.
Fig. 2 - 3: Position the cartridge lock in the built-in body, being careful to center the rear plug.
Fit the cartridge lock by tightening the four screws.
After completing the installation of the cartridge lock and spout, turn on the stopcocks and
check that the mixer tap unit operates correctly. Keep the tap pressurised for a few minutes
checking eventual leaks.
Fig. 4: Insert the plate on the cartridge lock.
Fig. 5: Screw the cover ring onto the cartridge lock. Insert the handle on the cartridge rod, fi xing
it with the grub screw. Position the cover hole plug.
Fig. 6: Engage the handle on the diverter rod, fi xing it with the grain. Position the cover hole
plug.
CLEANING
In order to obtain a correct cleanliness, exclusively wash them with soap and water, rewash and
dry them with a soft towel and deerskin. Avoid the usage of alcohol, solvents, solid or liquid
detergents which contain corrosive or acidic substances, abrasive sponges, swab with metallic
strings because they could irreversibly compromise the surfaces.
THE USAGE OF THIS KIND OF DETERGNETS DURING THE CLEANING OF THE MIXER EXCLUDE
IB RUBINETTERIE FROM ANY WARRANTY OBLIGATION.

Publicité

Table des Matières
loading

Table des Matières