Attaching Flue Duct; Removing The Appliance - Bosch HIB82651UC Instructions D'installation

Attaching flue duct

Hidden surfaces may have sharp edges. Use caution
when reaching behind or under appliance.
Remove the protective foil from the flue ducts.
1.
Remove the protective foil from the extractor hood.
2.
Fasten the upper flue duct using 6 screws.
3.
Position the lower flue duct on the extractor hood
4.
using 4 plastic brackets. Use a plastic bracket for
each corner of the flue duct.
Fasten the lower part of the flue duct using 4 screws.
5.
Install metal grease filter.
6.

Removing the appliance

Remove the metal grease filter.
1.
Loosen the flue duct.
2.
Disconnect the appliance from the power supply.
3.
Loosen the exhaust air lines.
4.
Loosen screws for fastening the appliance.
5.
Remove the appliance.
6.
13