Chapter 3 Using The Appliance; Prior To Use; Thermostat - Gamko Noverta Mode D'emploi

Chapter 3
•
Clean the cabinet prior to use. For further details we refer to chapter
maintenance.
• Leave the installation to stand for at least 2 hours before switching
on the cabinet.
• Plug into a grounded power socket.
REMOVE THE PLUG FROM THE SOCKET!
GM-line plug ready models have an electronic thermostat.

Thermostat

Using the thermostat
For use and settings of the thermostat, please
refer to the manual supplied with this
product.
XR02CX for GM2/212MU.
To see the set point.
1. Push and immediately release the SET key, the set point will
be showed;
2. Push and immediately release the SET key or wait about 5 sec
to return to normal visualisation;
To change the set point.
1. Push the SET key for more than 2 sec to change the set point
value;
2. The value of the set point will be displayed and the °C or °F
LED starts blinking;
User Manual
Using the appliance

Prior to use

EMERGENCY STOP
37