Possible Malfunctions - Bartscher 110.709 Mode D'emploi

7. Possible Malfunctions

Problem
Does not cool
Not enough
cooling power
The above situations are only examples designed to assist you in determining the
possible sources of problems. If such problems or other similar ones occur,
immediately turn off the device and do not use it. Contact qualified personnel or a
sales agent in order to arrange examination of the device and its repair.
Cause
• Plug improperly inserted
into socket.
• Safety fuse has discon-
nected power source.
• Power outage
• Damaged temperature
regulator.
• Device is near a heat
source or in direct sunlight.
• Poor air circulation inside
the device.
• Products placed inside the
device are too hot.
• Cooled table is overfilled.
Solution
• Remove plug and reinsert
properly into socket.
• Check fuses, connect device
to another socket.
• Check power supply.
• Contact a sales agent.
• Ensure proper distance
between cooled table and
heat source.
• Ensure proper distance from
walls and other objects.
• Allow products to cool before
placing them inside the
cooled table.
• Do not overfill the cooled
table; remove unneeded food
products if possible.
- 31 -