Waste Disposal; Bartscher Gmbh Franz-Kleine-Str; D-33154 Salzkotten Germany - Bartscher 110.110 Mode D'emploi

Problem
Insufficient
cooling power
The above situations are only examples designed to assist you in determining the
possible sources of problems. If such problems or other similar ones occur,
immediately turn off the device and do not use it. Contact qualified personnel or a
sales agent in order to arrange examination of the device and its repair.

8. Waste disposal

Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for
use before disposal. For that purpose disconnect device from mains supply and
remove mains connection cable from the device.
NOTE!
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
- 32 -
Cause
• The device is near a heat
source or exposed to
direct sunlight.
• Poor air circulation around
the device.
• Food products inside the
device are too hot.
• The device is overfilled.
For the disposal of the device please consider and act
according to the national and local rules and
regulations.
Solution
• Ensure sufficient distance
between the device and heat
sources.
• Ensure sufficient distance
between the device and walls
or other objects.
• Allow food products to cool
before placing in the device.
• Avoid overfilling the device,
remove unneeded food
products if possible.
phone: +49 (0) 5258 971-0
fax: +49 (0) 5258 971-120