Instructions For Use; Care And Maintenance; Warranty - BIELMEIER 040012 Mode D'emploi

GB

INStRuCtIoNS FoR uSE

After having attached the machine to the table
with the clamp supplied, place the handle into
the special hole (Fig. 3) and set the regulating
knob in the desired position (by pulling outward
and turning it (Fig. 4)):
 Pos. 1: For whole grain flour .
 Pos. 2: For large flakes (wheat, rye, barley) .
 Pos. 3: For thin flakes (ideal for oats) .
 Pos. 4: For the beer mixes .
The regulating knob also has intermediate po-
sitions for a finer adjustment, according to your
tastes .
Fill the hopper with cereal and turn the handle .
Whole grain flour, or cereal flakes obtained in
this manner, will fall into the special plastic con-
tainer situated under the rollers . If you desire
to obtain finer flour, pass the flour through the
rollers a few more times, leaving the regulating
knob in Position 1 . (If it is difficult for the flour
to descend through the hopper, help it along
by using the wooden brush supplied with the
machine . )

CaRE aND MaINtENaNCE

BIELmEIER mill, manufactured of materials of the
highest quality, and accurately regulated in the
factory, does not need any special maintenance
but we would like to give you some suggestions
for keeping the machine in perfect condition .
1) When you use BIELmEIER mill for the first ti-
me, let the machine work in Position 1 for 2 to
3 minutes; but discard the flour obtained . This
will serve to clean the rollers .
2) Never wash the machine with water or deter-
gents! (Fig. 5) For cleaning, use the wooden
brush supplied with the unit . Always clean
the rollers of the machine after use (Fig. 6) .
After use, put the cleaned machine back into
its box .
3) For removing the plastic hopper, push upward
as shown in the diagram (Fig. 7) .
4) If necessary, place a few drops of mineral oil
on the extremities of the rollers (Fig. 8) .
10
1
2
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)

waRRaNtY

In the EU and Switzerland, the following conditions apply for the warranty, which begins on the
date of purchase of the product:
1. warranty period: 2 years
2. Conditions of warranty:
a) Parts which exhibit defects in material and/or
workmanship after our inspection will either
be repaired or replaced at our discretion .
b) The warranty will only be honoured upon
presentation of this warranty card and
purchase receipt . This warranty is only valid
if it is filled out on the date of sale and in a
complete and appropriate manner .
c) This warranty is only valid for the first owner
of the device .
d) No replacement or repair of parts perfor-
med within the warranty period shall provi-
de grounds for any extension of the original
warranty period .
e) Any transportation costs shall be borne by
the purchaser (this shall not apply during the
first 6 months of the warranty) .
f) Within the first 6 months after the purchase/
delivery of the device, if the damage or de-
fect cannot be eliminated, if we refuse to
repair the defect, or in the event of a delay
in our repairing of the device, then the end
user can choose from one of three options:
the device will be replaced free of charge, its
value will be reimbursed, or the device will
be taken back with a refund of the original
purchase price which shall not exceed the
usual market price .
A 2-year warranty is provided for damage caused by defects in material or workmanship. The
warranty period shall begin on the day of delivery or on the day the buyer takes possession
of the item, and the warranty will only be honoured upon presentation of the warranty card
and the purchase receipt. No further claims shall be granted.
Model:
Stamp and signature of salesperson
GB
3. the warranty does not apply to:
 spots and scratches on the device
 control lamps and lights
 motor brushes
 easily breakable parts (e . g . bakelite, plastic,
glass), even in the case of defects in material
as recognized by us
 damage due to improper installation or im-
proper repair
 damage caused by an inappropriate vol-
tage supply or an inappropriate electricity
network
 improper or inappropriate use of the equipment
 unsatisfactory care
 damage caused by incompetent or insufficient
maintenance
 damage caused by dropping the equipment
or part thereof
 improper transportation or insufficient
packaging during transportation
4. the warranty shall be deemed void:
 in the case of use or application of the device
for something other than its intended use for
household purposes .
 in the case of any servicing or repairing of the
device performed by third parties that have
not been authorized for such purpose by our
company .
Important! Please write down the FD-code
located on the rating plate here:
Date of sale
11