Telic STD32 Mode D'emploi page 30

If you use a SIM card with a PIN different from „0000" in
the STD32, the STD32 will use a „wrong" PIN after every
restart. After the third trial your SIM card will be blocked. In
this case you need to use the „Super-PIN" or „PUK" to
assign a new PIN to your card. Please look into the user
guide of your mobile phone. There you find how to use the
PUK to de-block the SIM card.
Should you wish to use a SIM card which does not require a
PIN, this is also possible and the STD32 recognizes this and
will behave accordingly.
Before connecting the supply voltage to the STD32 please
insert the SIM card into the SIM card holder on the backside of
the STD32: To open the SIM card holder move it sideward and
flip it open; insert the card (mind the orientation) and close it
again. To fix it move the top sideward in opposite direction.
Connect the antenna, if not already done.
Now connect the power supply. Shortly after that the GSM LED
will shine constantly. Now the STD32 will automatically try to
connect to the GSM network. As soon as this is done, the GSM
LED will be flashing once every 2 seconds.
30