Publicité
Les langues disponibles
Les langues disponibles
PARTS DESCRIPTION
3
4
5
1
Battery cartridge
5
Release button
9
Main power button
FUNCTIONAL DESCRIPTION
WARNING:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Failure to switch off and remove the battery cartridge may
result in serious personal injury from accidental start-up.
Installing or removing battery cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery cartridge
firmly when installing or removing battery cartridge.
Failure to hold the tool and the battery cartridge firmly may
cause them to slip off your hands and result in damage to
the tool and battery cartridge and a personal injury.
2
1
► 1 . Red indicator 2. Button 3. Battery cartridge
1
2
7
6
2
Lock-off lever
6
Barrier
10
Caution lamp
8
9
3
Hanger
7
Switch trigger
11
Reverse button
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
CAUTION:
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
3
8 ENGLISH
10
11
4
Handle
8
Speed indicator
12
Shoulder harness
Always install the battery cartridge
Do not install the battery cartridge
12
Publicité
