Casselin CMSVC30 Mode D'emploi page 22

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
EN
Specific organs:
Clean the seal bar (left image and silicone bar (right image) every two weeks with alcohol.
Replace the electric resistance, the teflon of the sealing bar and the silicone bar every 200 hours. Check the
pump vanes, filters and solenoid valves for leaks every 2000 hours.
6.3 Safety instructions for maintaining the device
Daily check for damage to the power cord. Never use the appliance when the cord is damaged. If the cord is
faulty, it must be replaced by a qualified technician.
In the event of a fault, contact your dealer.
Any maintenance or repair intervention must only be carried out by a professional.
It is recommended to have the device checked by a competent professional at least once a year.
NOTE
In the event of a fault, unplug the appliance, let it cool down and contact your dealer. If the device does not
start, check your power cord. The device should not be plugged into a multiple socket, but directly to a wall
outlet. For any other anomaly, contact your dealer.
NOTE
Waste from used devices : any used device must, when disposing of it, comply with the regulations in force
in its country *. It is essential to make the device unusable before disposal by removing the power supply
cable.
* in terms of ecology and recycling

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cmsvc40Cmsvc40a

Table des Matières