Header
A
A To outdoor unit
B To indoor unit
•
No restriction is applied to the mounting posture of the header.
•
If the diameter of the refrigerant piping selected using the proce-
dures described on pages 14 and the size of the joint is different,
match the sizes using a deformed joint. The deformed joint is in-
cluded with the kit.
C Pipe cutter
D or
B
E Deformed joint
•
When the number of pipes to be connected is smaller than the number
of header branches, install a cap to the unconnected branches. The
cap is included with the kit.
C
D
E
17