Wallbox COMMANDER Guide D'installation page 12

E N
5. Closure of the device
Step 5.1: Reconnect the cover communication cable.
Step 5.2: Close the front cover, taking special care with the fitting and ensuring that the O-ring remains in place.
Step 5.3: Secure the cover by tightening the Torx screw.
In case it is needed to reopen the device, use only the tool (I-1) provided for this procedure
included in the Wallbox box. The use of any other tool or means may cause damage in the
charger, which wouldn't be covered by the product warranty.
6. Configuring IT network
6-A. Directly from the charger
Step 6-A.1: Enter in the Settings menu in the
bottom bar.
Step 6-A.2: In the Settings menu, enter System
menu.
6-B. Using the Wallbox App
Step 6-B.1: Download the Wallbox App available
from Android Play Store or Apple App Store.
At this point the Commander is registered in
myWallbox. To further configure the network as IT
follow the next steps:
Step 6-B.4: Enter Wallbox App and select your
charger from the charger list.
12
Step 6-B.2: Log-in using
your account.
Step 6-A.3: In the Settings menu, enter in the
Earthing menu.
Step 6-A.4: Enable the IT network button.
Step 6-B.3: Add your
charger by clicking on the
"+" button on the main
page, introduce the SN
and UID of your charger.