Safety Notes; Important Notes; Functions - marklin 216 Série Notice D'utilisation

1. Safety Notes

• This locomotive is to be used only with an operating system designed for it (Märklin AC transformer,
Märklin Delta, Märklin Digital or Märklin Systems).
• Use only switched mode power supply units and transformers that are designed for your local power
system.
• This locomotive must never be supplied with power from more than one power pack.
• Pay close attention to the safety warnings in the instructions for your operating system.
• Do not expose the model to direct sunlight, extreme changes in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.
2. Importantes Notes
• The operating instructions are a component part of the product and must therefore be kept in a safe
place as well as included with the product, if the latter is given to someone else.
• Maintenance, servicing, and repairs may only be done by adults.
• Please see your authorized Märklin dealer for repairs or spare parts.
• The warranty card included with this product specifi es the warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html

3. Functions

• Recognition of the mode of operation: automatic.
• Addresses that can be set: 1 - 255
• Address set at the factory: 72
• Headlights for the locomotive. They can be turned on and off in
digital operation.
• ABV - Adjustable acceleration/braking delay.
• Adjustable maximum speed.
• Setting the locomotive parameters (address, acceleration/bra-
king delay, maximum speed): with the Control Unit,
Mobile Station, Central Station.
Insert the locomotive card
Controllable Functions
I
ABV, off
4
F0 F4
f0
f4