Entering Personal Data; Automatic User Recognition - ADE BE 1615 FITvigo Mode D'emploi

Entering personal data

Connect the device with the app (pairing)
1. Activate Bluetooth on your smartphone.
2. Start the app and follow the instructions. Pay attention to the information and
explanations displayed.
After a short period of time, you have the scales connected with the FITvigo app.
Positioning the scales
− Place the scales on an even, firm, and dry surface. Do not place the scales on
carpet.
Entering personal data
The scales are equipped with 8 memory cells in total.
1. Press SET.
A memory cell number will be shown blinking (P1) on the display.
2. Using the or the
3. Press SET.
On the display, the preset value for height (e.g. "165" for cm) will flash.
4. Using the or
5. Press SET.
The preset value for that age blinks on the display.
6. Using the or the
Finally, press SET. You have thus input the necessary data.
"0.0" is shown on the display and you can weigh yourself. If you do nothing else, the
scales will automatically switch off after a few seconds.
‚ If you hold down the
flow of the displayed data will occur more quickly.
‚ Entered data can only be overwritten by making a new entry.

Automatic user recognition

The scales are equipped with automatic user recognition.
As soon as you step onto the scales, they turn on automatically and within a few
seconds show you the ascertained weight.
If the weight difference between two stored persons is less than 3 kg, automatic user
recognition does not work. In this case, "P1-P2" (for example) will be shown on the display:
This indicator means that the scales cannot match the person on the scales
unambiguously to one of the stored users. The scales display the two users that cannot
be differentiated (in this example, "P1" and "P2").
20
button, select the desired memory cell.
button, input your height.
button, enter your age.
or the button, the forward and backward
Bathroom Scales BE 1615/1616/1617