ADE BA 1601 FITVIGO Mode D'emploi page 27

The measured values will then be shown to you repeatedly on the display.
The arrow on the display indicates which indicators or values are being shown.
Indicator Meaning
1. Fat Your body fat proportion in % with simultaneous evaluation
indicator:
2. Water Your body water in %
3. Muscle Your muscle mass in %
4. Bone Your bone mass in kg
5. Your body weight in the set unit of measurement
Calling up stored values
After an analysis has been performed, you can display the values of your last
measurements at any time.
1. Turn on the scales using SET.
2. Using or , select your memory cell.
The data from the last measurement will be displayed, one value after another.
"0.0" will then be shown on the display and you can weigh yourself. Otherwise the
scales switch off after a few seconds.
Weighing tips
‚ Weighing for the body analysis can only be carried out barefoot. In doing so, your
feet should only be lightly moistened. Completely dry feet can lead to false results,
since the electrical conductivity will then poor.
‚ During the measuring process, stand still and do not hold onto anything.
‚ Do not weigh yourself directly after unusual physical exertion.
‚ Do not weigh yourself immediately after standing up. Wait approximately fifteen
minutes. In this time, the water is able to distribute through your body.
‚ Always attempt to weigh yourself at the same time, in order to obtain comparable
values.
Body Analyser Scales BA 1601
V. High = obese
High = too much body fat
Normal = normal body fat proportion
Low = too little body fat
Body analysis
27