VINCENT PHO-200 Manuel D'utilisation page 31

If your record player is equipped with a crystal pickup system
or if it contains a phono preamplifier then the record player
must be connected to the amplifier's line level input directly and an
external phono preamplifier is not necessary.
Your local HiFi specialist will assist you if there is any help needed. He
will set up your record player if you let him.
CONNECTION OF THE POWER SUPPLY
Plug in the power supply cable (8) to the PHO-200 power socket "DC 12V
200mA" (6). Check whether the wall mains socket provides the appropria-
te mains power, which is the case if it is supplied with 230 V AC 50 Hz.
After all other cable connections have been made push the power supply
into a mains socket. The PHO 112 will not be switched on through that. As
long as the device is connected to a live mains supply and switched on by
pushing the mains switch, the Power LED (1) is lit on the front oft the devi-
c
It should not be separated from the mains except if you intend not to use it
for one or more weeks. By doing this you make sure the circuitry keeps a
constant temperature to guarantee the best audio quality.
Always connect the AC adaptor to the mains before you switch
on the amplifier/preamplifier!
e .
Vincent
31