Assembly - Daikin Altherma C Gas W EHOB12AAV1 H Instructions D'installation

4.3

Assembly

The boiler can be hung to the wall using :
the wall suspension strip and a the connection kit EKVK4AA
•
a B-pack including an expension vessel and a connection kit.
•
4.3.1 Assembling suspension strip and assembly bracket
Make sure the construction of the wall is suitable for hanging the boiler.
•
Drill the holes for the suspension strip and the connection kit in the wall
•
using the template delivered with the boiler.
Mount the suspension strip and the assembly bracket horizontally on the
•
wall, using the associated attachment materials.
The boiler can now be placed on the suspension strip simultaniously sliding
•
the pipes of the boiler into the valves in the assembly bracket.
4.3.2 Assembling B-pack
Make sure the construction of the wall is suitable for hanging the boiler and
•
B-pack.
Drill the holes for the B-pack kit in the wall using the template delivered
•
with the boiler.
Mount the B-pack on the wall using the associated attachment materials.
•
Place the assembly bracket in the frame as described in the manual
•
inclued in the B-pack.
Connect the flexible hose on the expension vessel and the conenction on
•
the return valve. Make sure the seal rings are placed !
The boiler can now be placed on B-pack simultaniously sliding the pipes of
•
the boiler into the valves in the assembly bracket.
Daikin Europe NV
020601020
14