Cleaning The Cylinder Area; Replacing The Fuel Filter; Replacing/Cleaning The Spark Arrester Screen - Makita DCS460 Manuel D'emploi Et De Sécurité

14
B
15
C
D

Cleaning the cylinder area

Remove cover.
Remove the fan housing.
CAUTION: To prevent eye injury, always wear eye protec-
tion when cleaning the filter with compressed air!
The entire area (14) can now be brushed clean or cleaned
with compressed air.
A bottle brush can come in handy for cleaning out the cylinder
ribs.

Replacing the fuel filter

The felt filter (15) of the fuel filter can become clogged. It is
recommended to replace the fuel filter once every
three months in order to ensure unimpeded fuel flow to the
carburetor.
To remove the fuel filter for replacement, pull it out through the
tank filler neck using a piece of wire bent at one end to
form a hook.

Replacing/cleaning the spark arrester screen

The spark arrester screen should be checked and cleaned
regulary.
16
Loosen the screw (16) and remove the spark arrester screen
(17).
Caution: Do not use sharp or pointed objects for screen
cleaning. Damaged or misformed screen wires may result.
17
Reassembly the spark arrester screen and tighten the screw.
STOP
35