AcceleDent OPTIMA Mode D'emploi page 20

transmits and receives electromagnetic energy through at 2.4 to 2.4835 GHz.
The band is split into 40 2 MHz channels. The maximum transmit power is
less than 1 mW.
10.13.1.3. See IEC 60601-1-11 clause 4.2.3.1 for applicable conditions. This
device has been tested and found to comply with requirements for CISPR 11
Class B digital devices, which is designed to provide reasonable protection
against interference in a residential setting. However, there is no guarantee that
interference will not occur in a particular installation.
10.14. Electromagnetic Emissions
10.14.1. The Activator is intended for use in the electromagnetic
environment specified below. The customer or the user of the unit should
assure that it is used in such an environment.
10.14.2. In accordance with Clause 4.3 of IEC 60601-1, AcceleDent Optima
does not have Essential Performance.
Emissions Test Compliance
RF Emissions Group 1
CISPR 11
RF Emissions Class B
CISPR 11
Harmonic emissions N/A
IEC61000-3-2
Voltage fluctuations N/A
/ Flicker emissions
IEC61000-3-3
10.14.3. Bluetooth Low Energy:
10.14.3.1. Bluetooth, Bluetooth Low Energy, Bluetooth Smart and the
Bluetooth logo are registered trademarks of Bluetooth SIG.
10.15. Electromagnetic Immunity
10.15.1. Electromagnetic Immunity Part 1
10.15.1.1. The Activator is intended for use in the electromagnetic
environment specific below. The customer or the user of the Activator
should assure that it is used in such an environment.
The AcceleDent Optima uses RF energy for internal
function and low power communication; therefore, its
RF emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
The system is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes.
BACK TO CONTENTS
20
Page of 51