Publicité
Les langues disponibles
Les langues disponibles
Problem
Too much foam forms in the
machine. (**)
Foam is overflowing from the
detergent drawer.
Laundry remains wet at the end
of the programme. (*)
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the
machine and to its surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.4.2
A
CAUTION:
dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.
26 / EN
Reason
Improper detergents for the washing machine are
being used.
Excessive amount of detergent is used.
Detergent was stored under improper conditions. • Store detergent in a closed and dry location.
Some meshed laundry such as tulle may foam too
much because of their texture.
Detergent is put in the wrong compartment.
Softener is being taken early.
Too much detergent is used.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
If you cannot eliminate the problem although you follow the instructions in this section, consult your
Solution
• Use detergents appropriate for the washing
machine.
• Use only sufficient amount of detergent.
Do not store in excessively hot places.
• Use smaller amounts of detergent for this
type of item.
• Put the detergent in the correct
compartment.
• There may be problem in the valves or in the
detergent dispenser. Call the Authorised
Service Agent.
• Mix 1 tablespoonful softener and ½ l water
and pour into the main wash compartment of
the detergent drawer.
• Put detergent into the machine suitable
for the programmes and maximum
loads indicated in the "Programme and
consumption table". When you use additional
chemicals (stain removers, bleachs and etc),
reduce the amount of detergent.
• Use recommended amount of detergent.
Washing Machine / User's Manual
Publicité
