Parts Of The Turntable - Teac GF-350 Manuel Du Propriétaire

A
G
A turntable
B
screw fixing the turntable for transportation
Before use, completely loosen the screw by turning it
clockwise with a coin or screwdriver.
When you transport the unit, turn the screw counterclockwise
to secure the turntable.
C cue-lever
Use this lever to lift the tone arm.
D tone arm holder
E speed selector
F tone arm
G
45 RPM adaptor

Parts of the Turntable

How to open/close the turntable cover
To Open:
1 Lift the turntable cover all the way up until it stops.
2. Lower the cover slowly until the latch engages.
3. The cover will now stay open. If the latch does not engage,
repeat these steps again.
To Close:
1. Lift the cover all the way up until it stops.
2. The latch should disengage and you may now slowly lower
the cover.
3. Make sure you grasp the cover by the edges to avoid pinching
your fingers as it closes.
B
C
D
E
F
Before use, slide the stylus
guard (grayish smoke
colored plastic cover) up.
9