Bosch SGE53X52UC Notice D'utilisation page 14

en-us Water softening system / special salt
Adjusting the water
softening system
The amount of salt dispensed can be
set from •:‹‹ to •:‹ˆ. Salt is not
required at the set value •:‹‹.
Set the softening system as follows:
Ask your local water utility
1.
company for the water hardness
value of your tap water.
Required setting can be found in
2.
the water hardness table.
Press On/Off button (.
3.
Hold down function key # and
4.
press Start button P until the
display 8 indicates •:‹x (x can
be any number).
Release both buttons.
5.
The indicator of function key #
flashes and the display 8
indicates •:‹‹. Press function key
3 to select the desired setting.
Press Start button P to save
6.
the setting.
The chosen setting has now been
stored.
14
Using special dishwasher
salt
As soon as the low salt indicator
lights up on the digital display 8,
salt should be topped off. Always
refill with special salt immediately
before switching on the appliance.
This ensures that overrun special salt
solution is immediately washed out
and does not corrode the rinsing tub.
NOTICE
Detergent will destroy the water
softening system! Never pour
detergent into the salt dispenser.
Top off the salt as follows:
Undo the screw plug on the
1.
dispenser 1Z.
Fill the dispenser with water
2.
(required only when switching on
the appliance for the first time).
Add salt as illustrated (do not use
3.
table salt, salt tablets or salt for
use with whole house water
softeners).
The water is displaced and runs
out.
For more information about buying
dishwasher salt, please contact
customer service (1-800-944-2904).