Radio; Changing The Radio Frequencies For Each Country (Cde-9846 Only); Listening To Radio; Manual Storing Of Station Presets - Alpine CDE-9846 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Radio

CDE-9846
TUNE/A.ME
SOURCE/POWER
g f
MUTE/SETUP
CDE-9842
TUNE/A.ME
SOURCE/POWER
g f
Changing the Radio Frequencies for each
Country (CDE-9846 only)
For customers not living in North America, change the radio
frequencies as follows.
1
Press and hold MUTE/SETUP for at least 2
seconds to select the SETUP mode.
2
Select the "AREA" mode by pressing g or f.
3
Choose either AREA 1 or AREA 2 by pressing
BAND.
AREA 1: Radio frequencies for North America
AREA 2: Other Radio frequencies
4
Pressing and holding MUTE/SETUP for at least 2
seconds will return to normal mode.
• The stored radio stations will be cleared every time you change the
setting.
6
-EN
BAND
Preset buttons
(1 through 6)
BAND
Preset buttons
(1 through 6)

Listening to Radio

1
Press SOURCE/POWER until a radio frequency
appears in the display.
2
Press BAND repeatedly until the desired radio
band is displayed.
F1 (FM1) → F2 (FM2) → AM → F1 (FM1)
3
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode) → SEEK (Local mode) →
OFF (Manual mode) → DX SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press g or f to tune in the desired station.
Holding down g or f will change the frequency
continuously.
• The ST indicator appears on the display when a stereo FM station
is tuned in.

Manual Storing of Station Presets

1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of
the preset buttons (1 through 6) that you want
to store the station on.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.

Publicité

Table des Matières
loading

Table des Matières