Husqvarna HU775H Manuel De L'opérateur page 8

TO ADJUST CUTTING HEIGHT
All four wheels are adjusted by a single lever.
1. Pull adjuster lever toward wheel. To raise mower, move
lever forward to desired position. To lower mower, move
the lever toward the rear (Figure 9).
1
1. Wheel adjuster lever
TO CONVERT MOWER
Your lawn mower was shipped ready to be used as a
mulcher. To convert to bagging or discharging:
REAR BAGGING
1. Lift rear door of the lawn mower and place the grass
catcher frame hooks onto the grass bag brackets
(Figure 10).
2. To convert to mulching operation, remove grass catch er
and close rear door.
OPERATION
Figure 9
2
3
1. Grass catcher frame hook
2. Rear door
3. Grass bag bracket
4. Grass catcher handle
REAR DISCHARGING (See Fig. 11)
1. Lift the rear door and install the clipping deflector (avail-
able accessory) legs into holes of handle brackets as
shown (Figure 11).
• When the rear door is lowered it will rest on the top of
the clipping deflector and secure it to the mower.
• Mower is now ready for rear discharging operation.
• To convert to mulching or bagging operation, clipping
deflector must be removed.
1
2
1. Rear door
2. Deflector bar "leg"
3. Clipping deflector
4. Handle bracket holes
8
1
Figure 10
4
3
Figure 11
4