Yamaha 40V Manuel D'utilisation page 126

UP
3) Hold the rear of the top cowling with
one hand, tilt the engine up, and turn
the tilt-support lever toward you and
support the engine.
403011
EMG63210
PROCEDURE FOR TILTING UP
Power trim and tilt model
1) Remove the fuel-line connection from
the motor.
2) Push the power trim and tilt switch
"UP" until the outboard has tilted up
completely.
701046
3) Turn the tilt-support lever toward
engine
engine.
w
After tilting the engine, be sure to sup-
port it with the tilt-support lever. Other-
wise, the engine could fall back down
suddenly if oil in the power trim and tilt
unit should lose pressure.
403011
EMG64011
PROCEDURE FOR TILTING DOWN
Hydro-tilt model
1) Release the tilt support lever holding
the rear of the top cowling with one
hand.
2) Tilt the engine down.
3-29
bracket and support
GB
the