Makita DGA406 Manuel D'instruction page 14

► 1. Exhaust vent 2. Inhalation vent
Remove the dust cover from inhalation vent and clean it
for smooth air circulation.
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
CAUTION:
Your tool is supplied with a guard for use with any recommended grinding wheel, multi-
disc, flex wheel and wire wheel brush. If a diamond wheel and/or cut-off wheel are also available for use
with the tool, they should only be used with the appropriate optional guard for cut-off wheels.
If you decide to use your Makita grinder with approved accessories which you purchase from your Makita distribu-
tor or factory service center, be sure to obtain and use all necessary fasteners and guards as recommended in this
manual. Your failure to do so could result in personal injury to you and others.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
• Makita genuine battery and charger
2
2
3
3
6
4
7
5
5
1
2
8
9
10
► 1. Dust cover
NOTE: Clean out the dust cover when it is clogged
with dust or foreign matters. Continuing operation
with a clogged dust cover may damage the tool.
1
2
11
14 ENGLISH
13
12
3
14
5
1