LENCO DIR-260 Mode D'emploi page 27

Select "Mode" to set the alarm mode to Buzz, Internet radio, DAB or FM.
Select "Preset" to set the alarm sounding by the last listened or the stored station in Internet
radio, DAB or FM page.
Select "Volume", turn the NAVIGATE knob on unit or press the or button on remote
control to set the desired volume.
Select "Save" after all settings, the alarm icon will appear at the bottom column of the
screen, use the same way to set the Alarm 2.
When the alarm sounds, press the IMODE button on unit or press the button on
remote control to stop sounding.
To cancel alarm completely, enter the alarm settings and set it OFF. The alarm icon will
disappear.
SYSTEM SETTINGS:
After Main menu setup is completed, enter system settings, the following page will appear.
1. In System settings menu, if Network is selected, the screen will appear as below.
When Network wizard is selected, the unit will scan the available wireless network.
After scanning, the wireless network name list will appear, select one and try to connect.
Refer to page 6.
27