Dust/Chip Extraction; Connecting A Dust Extraction Unit; Select A Tool - Parkside PAMFW 12 D4 Traduction Des Instructions D'origine

Dust/chip extraction

Materials containing asbestos may not be
processed. Asbestos is a known carcinogen.
WARNING! RISK OF FIRE!
■ When working with electrical appliances that
can be connected to a vacuum cleaner via a
vacuum cleaner adapter, there is a risk of fire!
In unfavourable conditions, e.g. when sparks
are flying while sanding metal or metal resi-
dues in wood, wood dust in the bag of the
vacuum cleaner can spontaneously ignite.
This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after
being worked for a long time. Therefore,
avoid overheating of the material being
sanded as well as the appliance. Always
empty the vacuum cleaner's dust bag before
taking work breaks.
■ Always use dust extraction.
■ Ensure that your workplace is adequately
ventilated.
■ Observe the regulations applicable in your
country regarding the materials to be worked.

Connecting a dust extraction unit

♦ Place the dust extraction unit
appliance and fix it into place on the appliance
with the screw .
♦ Fit the angle adapter
unit .
The angle adapter
180°.
│ GB │ IE
■ 8
under the
onto the dust extraction
can be turned by up to

Select a tool

NOTE
► The universal fitting without-tool-change is
suitable for standard accessories.
HCS plunge saw blade 32 mm
Materials
Wood, plastic, gypsum (plaster) and other soft
materials
Application
–
separation and plunge saw cuts
–
sawing close to edges, even in hard to reach
areas
Example sawing of recesses in lightweight walls.
Diamond saw blade
Materials
Tile adhesives, tile joints
Application
–
removal of material residues, such as tile
adhesive, when replacing damaged tiles
–
milling of grout on wall and floor tiles.
Scraper
PAMFW 12 D4