Télécharger Imprimer la page

LENCO PA-30 Mode D'emploi page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

SPECIFICATIONS
General
Input Source:
Power Consumption:
Bluetooth Range:
LINE IN:
USB Playback:
Control Buttons:
LED Indicator:
Battery:
Power Source:
FREQ Range:
Speaker Output Wattage:
Speaker Driver Size:
Speaker Grill:
Full Range:
S/N:
Cabinet Material:
Dimension (W x H x D):
Weight (KG):
Bluetooth
Bluetooth Version:
Bluetooth Profile:
Bluetooth Frequency Band:
Bluetooth Range:
About Sealed Lead-Acid Battery:
This unit works either on the battery pack (Model no.: Tianchang 6-FM-2.6, 12V,
2600mAh) unplug the AC Power adapter from the DC input jack to work on the battery
pack (after fully charged); plugging the AC Power adapter while the battery pack is
attached initiates the charging of this battery. The charged LED indicator lights red
during charging, when the battery is fully charged the indicator is green. Fully charging
an empty battery pack may take 8 hours. A fully charged battery pack can last
approximately 10 hours at 50% volume of continuous playback. This playing time may
vary with the surrounding environment, the volume level of the speaker and the battery
condition. It is advised that you wait 10-20 minutes before recharging the battery pack if
it has run flat during operation.
Danger of explosion if battery is incorrectly replaced
Bluetooth/LINE/FM/USB
20W
10M (33 feet)
3.5mm
Full Speed 2.0
Power, Source, Bluetooth pairing, Volume Up/Down,
EQ, MIC (ECHO-/ECHO+), REP,
Power (RED LED x 1)
Bluetooth (BLUE LED x 1)
Battery LED (RED LED x 1, GREEN LED x 1)
Yes: 12V 2600MAH
DC 15V
1.0A
FM 87.5-108 MHz
25W (RMS)
5" (Subwoofer)
Metal Speaker Grill
Yes
> 50 dB
Plastic
135 X 260 X 350 (mm)
3.05KG
3.0 + EDR
A2DP, AVRCP
2.402 GHz - 2.480 GHz
10 meters
10

Publicité

loading