Specifications; Mounting Precautions (For Sharp Dealers And Service Engineers) - Sharp PN-80SC5 Manuel D'installation

Model
Power requirement
Operating temperature
Operating humidity
Power consumption (Maximum)
Dimensions (excluding protrusions)
Weight
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.

Mounting Precautions (For SHARP dealers and service engineers)

• When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people.
(PN-70SC5/PN-60SC5: at least 3 people.)
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
• Do not use an impact driver.
• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
• Do not use any screw holes other than VESA holes for installation.
nAttaching the Tray
Secure the tray using 5 tray mounting screws (M3) (supplied).
8
E

Specifications

PN-80SC5
AC 100 V - 240 V, 3.1 A,
50/60 Hz
41°F to 95°F (5°C to 35°C)
20% to 80% (no condensation)
270 W
Approx. 74-1/8 (W) x
inch (mm) 5 (D) x 44-13/16 (H)
(1882 x 127 x 1139)
lbs. (kg) Approx. 174.2 (79)
5/16 - 3/8 inch (8-10 mm)
PN-70SC5
AC 100 V - 240 V, 2.2 A,
50/60 Hz
200 W
Approx. 64-3/8 (W) x
3-3/4 (D) x 39-5/16 (H)
(1635 x 96 x 998)
Approx. 136.7 (62)
Screws (M6)
Bracket
The monitor mounting
PN-60SC5
AC 100 V - 240 V, 1.6 A,
50/60 Hz
135 W
Approx. 56 (W) x
3-3/4 (D) x 34-1/2 (H)
(1422 x 96 x 877)
Approx. 94.8 (43)