Using The Blade Inserts - Genius Chef S Mode D'emploi

4.2 Using the blade inserts

Preparing food
Wash the food and remove stems, cores or pits, and peel if necessary. The food must be cut into small
„
enough pieces to fit the cutting area so that there is sufficient space between the food and the blade
insert frame on all four sides.
Place the food with the cut side on the desired cutting surface.
„
CAUTION!
Risk of cutting injuries.
The blades are extremely sharp. Always hold parts by the plastic and do not touch the blades with your
hands or other body parts under any circumstances.
Only cut food by pressing down on the cutter top. Do not use your fingers to push food through the
blade inserts under any circumstances.
Instruction Manual
Remove accessories from the cutter base with the assistance of the
grip indent: Hold the accessory underneath the semi-circular tab and
lift it out of the cutter base.
Remove accessories from the Vario frame with the assistance of the
grip indent: Grip the indent and remove the accessory from the Vario
frame.
+
+
GB
23