EINHELL TC-VC 18/20 Li S Instructions D'origine page 18

the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Flexible suction hose
•
3-piece suction tube
•
Dual purpose nozzle
•
4x wheels
•
Dirt bag
•
Foam filter
•
Crevice nozzle
•
Adapter
•
Pleated filter with cover
•
Upholstery nozzle
•
Charger (in the case of Art. No.: 23.471.30 it
is not included in delivery)
•
Battery (in the case of Art. No.: 23.471.30 it is
not included in delivery)
•
Original operating instructions
•
Safety instructions
The equipment comes with a chain (z) on the tank
bottom. The chain helps to prevent static charging
during use.
3. Proper use
The cordless wet and dry vacuum cleaner is desi-
gned for wet and dry vacuuming using the appro-
priate fi lter. The equipment is not suitable for the
vacuuming of combustible, explosive or harmful
substances.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
Anl_TC_VC 1820 Li Kit_SPK9.indb 18 Anl_TC_VC 1820 Li Kit_SPK9.indb 18
GB
4. Technical data
Voltage supply to motor ......................... 18 V DC
Tank volume: ................................................. 20 l
Weight (without battery): ........................... 4.3 kg
Lithium-ion battery
Voltage: ................................................. 18 V DC
Capacity: .................................................. 3.0 Ah
Number of battery cells ................................... 10
Charger
Input voltage: .................. 200 - 250 V ~ 50-60 Hz
Output voltage: ...................................... 21 V DC
Output current: .............................................. 3 A
Protection class: ...........................................II /
5. Before starting the equipment
5.1 Appliance assembly
Fitting the appliance head (Fig. 1, 4/3)
The appliance head (3) is fastened to the con-
tainer (7) by the locking hook (6). To remove the
appliance head (3), open the locking hook (6) and
remove the appliance head (3). When fi tting the
appliance head (3), make sure that the locking
hook (6) locks into place correctly.
Fitting the castors (Fig. 5/13)
Fit the castors (13) into the appropriate mountings
on the underside of the tank (7). Push the castors
(13) fi rmly into the mounting until they engage
with a clicking noise (Fig. 5).
5.2 Fitting the fi lter
Notice!
Never use the wet and dry vacuum cleaner wit-
hout a fi lter!
Always ensure that the fi lters are perfectly secure!
Fitting the foam fi lter (Fig. 6/15)
For wet-vacuuming, slip the supplied foamed
plastic fi lter (15) over the fi lter basket.
Fitting the pleated fi lter (Fig. 7)
For dry-vacuuming, slip the pleated fi lter (18) over
the fi lter basket (Fig. 3/4). The pleated fi lter is sui-
table for dry-vacuuming only.
- 18 -
20.11.2017 14:19:52 20.11.2017 14:19:52