Table des Matières
Publicité
Mechanical installation
4.4
Installation
NOTICE
When you have ordered a version with flange, attach the hub first (
the "Assembly of the counter friction faces".
4.4.1
Brake assembly
Mounting the first hub onto the shaft
Fig. 4
4
1. Insert the key (4.1) into the shaft.
2. Press the first hub (4) onto the shaft.
3. Secure the hub (4) against axial displacement (for example, by using a circlip (4.2)).
INTORQ | BA 14.0196 | 04/2016
NOTICE
The toothed hub and screws must not be lubricated with grease or oil.
Hub
NOTICE
For reverse operations, we recommend also glueing the hub to the shaft.
15
4
4.1 Key
23), then continue with
15 End shield
23
Publicité
Chapitres
Table des Matières
