Table des Matières
Publicité
Safety instructions
2
Safety instructions
2.1
General safety instructions
❚
INTORQ components:
-
... must only be used as directed.
-
... must not be commissioned if they are noticeably damaged.
-
... must not be technically modified.
-
... must not be commissioned if they are incompletely mounted or connected.
-
... must not be operated without the required covers.
-
... can include live (current-carrying) as well as moving or rotary parts during operation according to
their degree of protection. Surfaces may be hot.
❚
For INTORQ components:
-
... the documentation must always be kept at the installation site.
-
... only permitted accessories are allowed to be used.
-
... only original spare parts of the manufacturer are allowed to be used.
❚
Follow all specifications and information found in the corresponding enclosed documentation.
These must be followed to maintain safe, trouble-free operations and to achieve the specified product
characteristics.
❚
Only qualified, skilled personnel are permitted to work on and with INTORQ components.
According to IEC 60364 or CENELEC HD 384, qualified, skilled personnel are persons:
-
... who are familiar with the installation, mounting, commissioning, and operation of the product.
-
... who have the qualifications necessary for their occupation.
-
... who know and apply all regulations for the prevention of accidents, directives, and laws relevant
on site.
❚
Risk of burns!
-
Surfaces may be hot during operation! Provide for protection against accidental contact.
❚
Risk of injury due to a rotating shaft!
-
Wait until the motor is at standstill before you start working on the motor.
❚
The friction lining and the friction surfaces must never contact oil or grease since even small amounts
reduce the braking torque considerably.
❚
The brake is designed for operation under the environmental conditions that apply to IP54 protection.
Because of the numerous possibilities of using the brake, it is still necessary to check the functionality
of all mechanical components under the corresponding operating conditions.
INTORQ | BA 14.0196 | 04/2016
11
Publicité
Chapitres
Table des Matières
