Fujitsu LIFEBOOK S752 Guide D'utilisation page 66

With the system oriented as shown in Figure 15, push and hold the battery bay release lock away from the battery
3
pack, and slide the battery release button to the right. This will unlock the battery. At the battery lift point, lift
the battery out of the bay.
Insert a new battery into the bay. Push and hold the battery bay release lock away from the battery pack, and
4
slide the battery release button to the left. This will lock the battery.
Plug in the AC adapter and turn the power on.
5
Battery Release Button
Hot-swapping Batteries
To hot-swap batteries in your battery bay, follow these easy steps:
B
E SURE TO PLUG IN AN
THE BATTERY IS BEING REPLACED
Battery Lock
Figure 15. Removing a Battery
AC A
DAPTER PRIOR TO REMOVING THE BATTERY
. I
F YOU DO NOT USE AN
Battery Lift Point
. T
HERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE
AC A
DAPTER YOU WILL LOSE ANY UNSAVED FILES
60
.