Precautions - Fujitsu LIFEBOOK S752 Guide D'utilisation

Masquer les pouces Voir aussi pour LIFEBOOK S752:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

From Off State
Turn on your system.
1
When the Security Indicator flashes, enter the password and press [Enter] button. For example, if the password is
2
22222, press button number [2] five times and press [Enter] button. The notebook will boot to normal operation.
From Hibernate State
Press your Power/Suspend/Resume button.
1
When the Security Indicator flashes, enter the password and press [Enter] button. The notebook should resume
2
normal operation.
Incorrect Password Entry
If an invalid supervisor or user password is entered three times in succession, the system will "beep" for about one
minute. If a valid password is entered within a minute (while system beeps), the beeping will stop and the notebook
will resume normal operation. If no password (or an invalid one) is entered while the system beeps, the system will
return to its previous locked state (suspend or off) and the Security Indicator will go off. To reactivate the notebook
after a password failure, you must press the Power/Suspend/Resume button, then enter a correct password
R
EMEMBER THE USER PASSWORD YOU SPECIFIED ON THE
USE YOUR COMPUTER

Precautions

Opening and Closing the Cover
Closing the cover automatically places the notebook into suspend mode. Opening the cover does not automatically
place the notebook into normal operation. Instead, you must enter the proper security password after pushing the
Power/Suspend/Resume button. This setting can be changed in the Power Options Control Panel.
. T
HE SUPERVISOR PASSWORD CAN OVERRIDE THE USER PASSWORD
S
P
A
. I
ECURITY
ANEL
PPLICATION
F YOU FORGET THE PASSWORD YOU WILL NOT BE ABLE TO
.
38
.

Publicité

Chapitres

Table des Matières
loading

Table des Matières