Fujitsu LIFEBOOK S752 Guide D'utilisation page 42

• Pushing [4] by itself
• Pushing [2] and [3] at the same time
• Pushing [1], [2], and [4] at the same time
• Pushing [1], [2], [3], and [4] at the same time
The following are valid passwords. The numbers within braces ({ }) are button strokes using more than one button.
• {[2]+[3]}, [1], [enter]
• [4], [enter]
• {[1]+[3]}, {[2]+[3]+[4]}, [1], [4], [2], [enter]
Setting Passwords
When shipped from the factory, no passwords are set. You have a choice of having no password or setting supervisor
and user passwords. You must set the supervisor password before the user password.
T
HE PURPOSE OF SUPERVISOR PASSWORD IS TO BE ABLE TO BYPASS THE USER PASSWORD IN CASE THE USER PASSWORD IS FORGOTTEN
SUPERVISOR PASSWORD ALONE WILL NOT LOCK THE SYSTEM
.
TO WORK
Setting Supervisor Password
You must have set a supervisor password before setting any user passwords. The supervisor password can bypass the
user password. Depending upon your operating system, use the appropriate procedure below.
Windows 7:
Go to the Start menu.
1
Select All Programs.
2
Select Accessories, then select Run.
3
Type in: C:\Program Files\Fujitsu\Security Panel
4
Application\Supervisor\FJSECS.EXE, then press [Enter]
Follow the on-screen instructions to set the Supervisor password.
5
. Y
OU MUST SET BOTH THE SUPERVISOR AND USER PASSWORDS FOR THE SECURITY PANEL
36
. T
HE