Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your
warning labels become illegible or are missing,
call 1-888-331-4569 for a free replacement.
WARNING:
TROUBLESHOOTING.
For assistance with your product, visit our website at www.craftsman.com for a list of service centers,
or call CRAFTSMAN at 1-888-331-4569.
PROBLEM
The wet/dry vacuum will not
operate.
The dust comes out from the
motor cover.
Reduced efficiency and
motor/speed vibration.
10
TROUBLESHOOTING
TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
POSSIBLE CAUSE
No power supply.
Faulty power cord.
Collection tank is full.
Switch in the wrong position.
The cartridge filter is missing
or damaged.
Vacuum has been used to
collect fine dust, such as dry
wall dust, fireplace soot, or
ash, without a fine dust filter.
There are blockages in the
nozzle, hose, or the collection
tank inlets.
The cartridge filter is clogged
by fine dust.
SOLUTION
Check the power supply, cord,
breakers, and fuses.
Unplug and check the power cord.
If damaged, have it repaired by a
professional.
Empty the collection tank.
Press the ON 'I' button on the power
head.
Attach or replace the cartridge filter.
Remove the standard cartridge filter
and install the appropriate fine dust
filter (available separately).
Unplug and check nozzle, hose and
collection tank inlets for blockages.
Take off the filter and clean it or
install a new cartridge filter.
Publicité
