Controls; Interior Fittings - Siemens KI87VVFE1 Manuel D'utilisation

en Getting to know your appliance

Controls

~ Fig. "
Button #
(
Switches the appliance on or off.
Refrigerator compartment
0
temperature display
Indicates the set temperature
in °C.
super display
8
This is lit when the Super
function is switched on.
°C button
@
Sets the temperature.

Interior fittings

(not all models)
Shelf
~ Fig. #
You can vary the shelf:
Pull out and remove the shelf.
■
Vario shelf
~ Fig. $
You can store tall items (e.g. cans
or bottles):
Take out the front part of the shelf
■
and push under the rear part.
Extendable shelf
~ Fig. %
You can give yourself a better overview:
Pull out a shelf.
■
You can completely remove the shelf:
Press and hold down both buttons
1.
under the shelf.
2. Pull out the shelf, lower and swing
out to the side.
26
Container
~ Fig. &
You can remove the container:
Pull out the container all the way,
■
lift at the front and remove.
Storage compartment
~ Fig. '
You can remove the storage
compartment:
Lift up storage compartment and
■
remove.
Freezer calendar
~ Fig. !/)"
The freezer calendar indicates the
maximum storage duration in months at
a constant temperature of –18 °C.
Ice cube tray
You can make ice cubes:
Fill the ice cube tray 3/4 full with
1.
water and place in the freezer
compartment.
Note: If the ice cube tray is stuck to
the freezer compartment, loosen with
a blunt implement only (e.g. spoon
handle).
2. To loosen the ice cubes, twist the ice
cube tray slightly or hold briefly
under flowing water.
Ice pack
In the event of a power failure or a fault:
The ice pack delays the warming of
■
the stored frozen food.
Note:
The longest storage time is
obtained by placing the ice pack on the
food in the top compartment.
You can take out the ice pack for
temporarily keeping food cool, e.g. in
a cool bag.