Beko RCNE520E30DZXP Manuel D'utilisation page 75

Troubleshooting
The warm air moving inside will
cause the product to run longer. Do
not open the doors too frequently.
•
The freezer or cooler door may be
ajar. >>> Check that the doors are
fully closed.
•
The product may be set to
temperature too low. >>> Set the
temperature to a higher degree and
wait for the product to reach the
adjusted temperature.
•
The cooler or freezer door washer
may be dirty, worn out, broken or
not properly settled. >>> Clean or
replace the washer. Damaged /
torn door washer will cause the
product to run for longer periods to
preserve the current temperature.
The freezer temperature is very low, but the
cooler temperature is adequate.
•
The freezer compartment
temperature is set to a very
low degree. >>> Set the freezer
compartment temperature to a
higher degree and check again.
The cooler temperature is very low, but the
freezer temperature is adequate.
•
The cooler compartment
temperature is set to a very
low degree. >>> Set the freezer
compartment temperature to a
higher degree and check again.
The food items kept in cooler compartment
drawers are frozen.
•
The cooler compartment
temperature is set to a very
low degree. >>> Set the freezer
compartment temperature to a
higher degree and check again.
The temperature in the cooler or the freezer is
too high.
•
The cooler compartment
temperature is set to a very high
Refrigerator / User Guide
degree. >>> Temperature setting
of the cooler compartment has
an effect on the temperature in
the freezer compartment. Wait
until the temperature of relevant
parts reach the sufficient level
by changing the temperature of
cooler or freezer compartments.
•
The doors were opened frequently
or kept open for long periods.
>>> Do not open the doors too
frequently.
•
The door may be ajar. >>> Fully
close the door.
•
The product may have been
recently plugged in or a new
food item is placed inside. >>>
This is normal. The product
will take longer to reach the
set temperature when recently
plugged in or a new food item is
placed inside.
•
Large quantities of hot food may
have been recently placed into the
product. >>> Do not place hot food
into the product.
Shaking or noise.
•
The ground is not level or durable.
>>> If the product is shaking when
moved slowly, adjust the stands to
balance the product. Also make
sure the ground is sufficiently
durable to bear the product.
•
Any items placed on the product
may cause noise. >>> Remove any
items placed on the product.
The product is making noise of liquid
flowing, spraying etc.
•
The product's operating principles
involve liquid and gas flows.
>>> This is normal and not a
malfunction.
33/34EN