Bosch GBH 180-LI Professional Notice Originale page 13

The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS plus drill chuck
(2) SDS plus tool holder
(3) Dust protection cap
(4) Locking sleeve
(5) Button for depth stop adjustment
(6) Release button for impact/mode selector
switch
(7) Impact/mode selector switch
(8) Rotational direction switch
(9) On/Off switch
(10) Handle (insulated gripping surface)
a)
(11) Battery
(12) Worklight
(13) Battery release button
(14) Auxiliary handle (insulated gripping surface)
(15) Depth stop
(16) Button for battery charge indicator
Bosch Power Tools
(17)
(18)
a) Accessories shown or described are not included with the
Technical Data
Cordless rotary hammer
Article number
Rated voltage
Rated speed
– Clockwise
– Anticlockwise
Impact rate
Impact energy per stroke ac-
cording to EPTA-Proced-
ure 05:2016
Tool holder
Max. drilling diameter
– Concrete
– Steel
– Wood
Weight according to EPTA-
Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
B) Optimum performance with driling diameter 6−10 mm
C) Depends on battery in use
D) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according
to EN 60745-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 90 dB(A); sound power
level 101 dB(A). Uncertainty K = 3 dB.
a)
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-6:
a)
Hammer drilling into concrete: a
Chiselling: a
Battery charge indicator
Universal holder with SDS plus shank
product as standard. You can find the complete selection of
accessories in our accessories range.
min
min
A)
min
B)
mm
mm
mm
C)
D)
and
12.0Ah.
(triax vector sum) and uncertainty K
h
=10.0 m/s
h
2 2
=7.0 m/s , K=1.5 m/s ,
h
1 609 92A 525 | (01.07.2021)
English | 13
a)
a)
GBH 180-LI
3 611 J11 1..
V= 18
-1
0−1800
-1
0−1800
-1
0−5100
J 2
SDS plus
20
13
30
kg 2.8−3.7
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V
4.0A/8.0Ah
GAL 18...
GAX 18...
GAL 36...
2 2
, K=1.5 m/s ,