Baby Jogger city mini GT2 Instructions D'assemblage page 13

and seat fabric.
19 Reinsert stopper at seat opening closest
to child' s shoulders. Pass back through
seat fabric and PE board. Tug on strap to
ensure stopper is locked. Repeat on both
sides.
WARNING: Avoid serious injury from
falling or sliding out. Always properly
adjust and fasten safety harness.
WARNING: Always use the crotch strap
in combination with the shoulder straps
and waist belt.
20 Slide the harness pads up to access
plastic guide on strap.
21 Hold the plastic guide and pull strap to
tighten or loosen.
USING SAFETY HARNESS
22 Insert side strap buckle into harness
buckle on both sides.
23 Insert connected harness and side strap
buckles into the sides of the crotch
buckle.
24 Press button on crotch buckle to release.
RECLINE THE SEAT
25 Pinch the clamp behind the seat, and
slide it down to desired recline.
26 Pull seat down on both sides to match
the clamp position. Reverse steps to
return to the upright position.
WARNING: When making adjustments
to the stoller seat, make sure child' s head,
arms, and legs are clear of moving seat
parts and pushchair frame.
27 For extra ventilation, roll up the seat back
flap and secure with elastic and button.
LEG SUPPORT
28 To use the leg support, lift the front of
the seat pad.
29 Rotate the support arm out and lower
the seat pad. Lock the support arm.
30 To lower leg support, reverse the steps.
FOLDING
• Remove your child from the seat.
• Disengage front wheel swivel locks.
• Remove all attachments and all items
from basket.
WARNING: To prevent injury, remove
Child Tray or Belly Bar accessory when
folding or unfolding the stroller.
31 Press buttons on both sides of frame.
Rotate handle up.
32
A. Insert finger into loop and pull up, then
B. Pull up on the "Pull to Fold" folding
handle and let the frame collapse.
33 Make sure the auto-lock lever clicks into
place.
34 Place pushchair upright in standing
position.
BASKET REMOVAL
35 From the front of the pushchair, unsnap
the 2 snaps and pull the straps out of
the foot well.
36 Lift basket off the hook.
37 From the back, lift the top of the basket
off the tab on both sides of the frame.
38 Remove the strap from the C clamp on
both sides of frame.
REMOVING THE SEAT FABRIC
39 Flip the pushchair over to expose the
seat bottom.
A Unfasten the 2 fastening strips
and pull them out of the pushchair
frame.
B Unfasten the fastening strip and
pull them out of the sides of the
pushchair frame.
C Unscrew the right carabiner hook
and pull strap out from the seat
pad.
40 Flip the seat back over on its wheels.
Pull seat fabric up and off of buttons.
41 Starting from the bottom, slide the seat
pad out from the stroller frame on both
sides.
42 From the top, slide the seat pad out of
the frame on both sides.
43 Remove seat fabric.
Reverse the steps to reattach the seat
pad to the frame.
WARNING: Make sure that all fasteners
are properly closed when re-attaching
the seat pad.
13
EN