Xo XOB30SMUA Notice D'utilisation page 16

E
F F
G
Fig.7: Place the bottom flue G on top of
the frame. Then pull out the top flue F
to the bracket and fasten it using the 2
screws E.
c
Fig.9: The filters C must be applied to the
suction unit inside the hood, centering
them inside of it and turning them 90° until
they snap into place.
E
c
c
1
2
Fig.8: Remove the aluminum panels
by pulling the lever 1 out and pushing
downwards 2.
2
Fig.10: Put the aluminum panels back in
place (Fig.8).
- 16 -
1